Prefabricated

HOUSE TYPE A

1- Base
The client has to build a base formed by 0,20m of tubenan, 0,10m of concrete e 1 variable steel armor depending on
the quality of the land.
To avoid the humidity on the pavement, it should be placed a plastic sleeve.
Must be executed a sewerage system to drain the water of the kitchen, toilet, sink and shower in PVC.
It will be provide ceramic material for base coat.

2- Resistant Structure
It will be provide the following elements:
- Galvanized steel bottom brace with the size of the house
- Galvanized steel top brace with the size of the house
- Pillars in square galvanized steel tube 60X60X3 mm with 2.5 m high
- Beams portico IPE 100 with horizontal rod on T 50, tied with adjustable turnbuckles M12
- Wombs of coverage in galvanized steel trough

3- Outdoor Panels
It will be provide outdoor panels with the dimensions of 1100x2600 mm composed by:
- Metallic comb of galvanized steel with thickness of 60 mm
- Front Panel in polyurethane 40 mm and two plates 0.5mm galvanized lacquered
- Thermal insulation of bonded foam polyurethane with 60 mm thickness
-MDF chipboard with high density of 8mm thick, finished with color to set by client.

4- Ceiling Panels
It will be provide ceiling panels com the dimensions of 1100x2200 mm and 1100x1100 mm composed by:
- Metallic comb of galvanized steel with thickness of 60 mm

- Thermal insulation in rock wool 40 mm thick density 50
- MDF chipboard of high density on both sides in white color.

5- Division Panels
It will be provide Division Panels with the dimensions of 1040x2550 mm composed by:
- Metallic comb of galvanized steel with thickness of 60 mm
- Thermal insulation of bonded foam polyurethane with 60 mm thickness
-MDF chipboard with high density on both sides with the color set by the customer

6- Coverage Panels
It will be provide Coverage Panels PT1000 with 45 mm of minimum thickness in polyurethane with clay color.
For the enclosure of two water it will be provided cut ridges with the same color.

7- Eaves
It will be provide Front Panels in polyurethane 40 mm with two lacquer galvanized steel plates with 0,5 mm
thickness to both of tops and eaves.
For the enclosure of this panels with the coverage, it will be carried out with flashings in lacquer galvanized steel
plates with 1 mm of thickness.

8- Exterior Frames
It will be provide windows, doors and shutters in lacquer aluminium according with the project containing double
glazing with 4 + 12 + 4 mm.

9- Interior Finishin
It will be provide doors, baseboards and ceiling wheel in MDF high strength with color finished.

10- Bathrooms Crockery/Shower
It will be provide sinks, toilets, shower cabines, mixers, flexible multilayer pipes PE / AL / PEX, accessories and
junction boxes for the full implementation of the baths and kitchen.

11- Kitchen Furniture
It will be provide Kitchen Furniture with wooden structure coated with high resistant MDF, dish washer in stainless
steel and top in synthetic material resistant to temperature and humidity.

12- Eletrical Instalation
It will be provide the following equipments to do the eletrical instsalation:
-General framework with unipolar circuit breakers and differential
- Single-phase sockets
- Switches
- Commutators
- Electrical wires to run the network and junction boxes


NOTE - All discriminated equipment will be provided at time of shipment.